Home > MoSi2 Heating Elements >

1800 MoSi2 Heating Elements 30x300mm High Heat Extensibility

Product Categories

HENAN ZG INDUSTRIAL PRODUCTS CO.,LTD

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

1800 MoSi2 Heating Elements 30x300mm High Heat Extensibility

Brand Name : ZG

Model Number : MS

Certification : CE

Place of Origin : CN

MOQ : 1 piece

Price : USD10/piece

Payment Terms : L/C, D/A, D/P, T/T, Western Union, MoneyGram

Supply Ability : 10000 pieces per month

Delivery Time : 3 working days

Packaging Details : Strong wooden box for Global shipping

MAX TEMPERATURE : 1700°C / 1800°C

DIAMETER : 3/6, 4/9, 6/12, 7/12, 9/18, 12/24mm

COOLING ZONE LENGTH : 80 - 1500mm

SHAPE : Special Shape

HEATING ZONE LENGTH : 80 - 1500mm

MOLYBDENUM PURITY : 99.9% High Purity

Contact Now

1800 MoSi2 Heating Element (30x300mm)

Specification:

Materials: MoSi2
Working temperature:
- 1750°C (3182°F) in air (short time)
- 1650°C (3002°F) in N2
- 1170°C ~ 1450°C (2138°F ~ 2642°F) in H2
Volume Density: 5 ~ 5.6g/cm3
Bend strength: 15 ~ 25kg/cm3
Vickers hardness: (HV) 570kg/mm2)
Porosity rate: 7.4%
Water absorption: 2%
Heat extensibility: 4%

Dimension:
1800 MoSi2 Heating Elements 30x300mm High Heat Extensibility
D1: Ø12mm
D2: Ø6mm
A: 30mm
L=L1+L2:=180+120=300mm

Installation

When installing heating element into furnaces, a separator should be placed between the two shanks of the heating element before hanging the element inside the furnace chamber. The proper separator width should be selected to fit the shanks smoothly and avoid damage to the element.

Warning:

Exercise extreme caution to not apply any stress on the elements during installation. Heating elements are very brittle and could break if the separator is too wide or if too much pressure is applied on them.

No warranty will be issued for damage caused by improper installation.

Resistivity Properties of MoSi2 Heating Element

The resistivity of MoSi2 heating elements rises with increase in temperature (shown in the graph below). When the temperature of the heating stage is below 300°C, less than 35% of the total output power should be applied to avoid stressing the elements with excessive current.
Generally the resistance of heating elements will not be affected by aging under normal operating conditions, therefore old elements can be used together with new ones.

1800 MoSi2 Heating Elements 30x300mm High Heat Extensibility .

Inspect your delivery:
Please check package for damages before accepting delivery.
Should damages found, please keep all packaging materials, take pictures, and report immediately to carrier/MTI.

No Warranty:
Kindly note this item is a consumable part, and not covered by warranty. Make sure to inspect for defect(s) thoroughly before use.

Product Tags:

1800 MoSi2 Heating Elements 30x300mm High Heat Extensibility Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	HENAN ZG INDUSTRIAL PRODUCTS CO.,LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

1800 MoSi2 Heating Elements 30x300mm High Heat Extensibility

1800 MoSi2 Heating Elements 30x300mm High Heat Extensibility

1800 MoSi2 Heating Elements

30x300mm MoSi2 Heating Elements

30x300mm mosi2 heater

1800 MoSi2 Heating Elements 30x300mm High Heat Extensibility Images